Sunday, June 24, 2018

nvidia - How can I improve battery life on my laptop?




I have a Macbook Pro 6,2. It uses Nvidia Optimus technology and would not work with Bumblebee as the i915 driver would fail. I had to uninstall Bumblebee, install nvidia-current, and blacklist nouveau and i915 to get my laptop up and running. So basically right now I'm running solely on my dedicated GPU which means I get only about 2:30 hrs of battery life.



Am I stuck with this short battery life until Nvidia provides proper support for their hardware?



Thanks.



Battery life in Linux sometimes tends to be shorter due to drivers not being able to automatically going into a sort of Power Saving mode.




Although the following suggestions won't change lots if your graphics card is on maximum power consumption permanently, I've found they've helped increase my battery life quite a bit:




  • Install CPUFreq



    sudo apt-get install indicator-cpufreq 





You will then be able to click on the icon to the right of the keyboard icon in this screenshot below (indicator bar):






enter image description here








And this should open up a menu like below:



enter image description here



The lower your processor speeds the less power it will consume, so either go with Powersave or put it on the minimum, this reduces battery power consumption especially well if you have a multi-core CPU.




  • Install TLP if you're running Ubuntu 13.04:




    sudo add-apt-repository ppa:linrunner/tlp
    sudo apt-get update
    sudo apt-get install tlp tlp-rdw smartmontools ethtool



For how to configure TLP in detail check the answers to this question on power-saving in 13.04 they explain more than enough for your needs I'd expect.




  • Install Jupiter if you're running 11.10, 12.04 or 12.10




    sudo add-apt-repository ppa:webupd8team/jupiter
    sudo apt-get update
    sudo apt-get install jupiter



This applet can be opened using the lightning bolt in the indicator bar:



enter image description here




Or alternatively if it doesn't start up automatically you can turn launch it by typing jupiter into a terminal window (opened using Ctrl+Alt+T). Once you click on the lightning bolt you'll have the following menu open up where you'll be able to choose your power-consumption setting:
enter image description here



Additionally in the devices tab you can disable wifi and bluetooth if you don't need them and would rather have more battery-life.




  • Install powertop: sudo apt-get install powertop




You run the app by typing in sudo powertop in the terminal and you use the arrow keys to go the far right column entitled Tunables, you should see something like this:



enter image description here



Using the arrow keys select each of the "Bad" settings and set them to "Good" by pressing enter, this should ensure your computer is using your battery in an optimal way.



Set Jupiter and CPUFreq on startup



Normally Jupiter and CPUFreq should start up automatically next time you reboot but if they don't all you have to do is go into start-up applications and type in the following:





  • For jupiter



enter image description here




  • For CPUFreq



    enter image description here





Obviously you can change the names and comments of the start-up programs to whatever you want as long as the command stays the same.



So in short to answer your question:



If it is your GPU which is draining your battery, then you have to wait on nVidia. However if any other component is also draining power the steps I've highlighted above will help you solve any problems and increase your battery life.



NB. Some information taken from the following sources:






Many thanks to both of them.


No comments:

Post a Comment

11.10 - Can't boot from USB after installing Ubuntu

I bought a Samsung series 5 notebook and a very strange thing happened: I installed Ubuntu 11.10 from a usb pen drive but when I restarted (...