Just installed Ubuntu 13.10, I tried to connect wireless but It didn't detect any network.
This is what happens when I check my wireless:
:~$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
I've tried with the command:
-rfkill unblock 0
but I guess is only for soft blocks, because don't works after reboot...
How could I fix it this?
I let you check the information about my network card and kernel. The version of ubuntu is in spanish, sorry.
:~$ sudo lshw -c network
[sudo] password for :
*-network DESACTIVADO
descripción: Interfaz inalámbrica
producto: AR9485 Wireless Network Adapter
fabricante: Qualcomm Atheros
id físico: 0
información del bus: pci@0000:03:00.0
nombre lógico: wlan0
versión: 01
serie: 24:0a:64:14:77:bf
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical wireless
configuración: broadcast=yes driver=ath9k driverversion=3.11.0-15-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
recursos: irq:17 memoria:f7900000-f797ffff memoria:f7980000-f798ffff
*-network
descripción: Ethernet interface
producto: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
fabricante: Realtek Semiconductor Co., Ltd.
id físico: 0.2
información del bus: pci@0000:04:00.2
nombre lógico: eth0
versión: 0a
serie: ac:22:0b:09:91:b2
tamaño: 100Mbit/s
capacidad: 1Gbit/s
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8411-1_0.0.3 06/18/12 ip=192.168.1.106 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
recursos: irq:45 ioport:d000(size=256) memoria:f2104000-f2104fff memoria:f2100000-f2103fff
Furthermore I want to say that this same problem happened with the last versions of Linux Mint (15 and 16).
P.S: I've looked everywhere on this forum but I haven't found solution.
No comments:
Post a Comment